Click Below to View Pictures

LeBlond1

LeBlond2

Year Built: 1957       Price:   $10,000

General Info:  14" X 120", Hard ways, 1200 RPM, Chucks, 2-S.R., F.R., Mint!

Click Below to View Picture

Poreba

Year Built: 1983 or 1984   Price:   $25,000

General Info:  32 X 120, 32" Swing over ways, 130" Between centers, 44" Swing in gap to 16" from chuck face, 21" Swing over cross slide, 36 Spindle speeds from 8 to 800 R.P.M.,  60" threads from 1/4 to 30 per inch, 80 Metric threads from 0.2 to 12.8, Hard ways, 33/4" Hole through spindle, 4 Way rapid travers, Follower rest & 16" steady rest, Taper attachment, #5 Morse taper in tailstock with 5" Diameter barrel, 4 way turret tool post, 3 Jaw chuck (16"),  4 Jaw chuck (30" cast body), Machine Manual, Ways show some wear near headstock,  Runs excellent, Cleaned & painted.

Click Below to View Pictures

Niles-1

Niles-2

Year Built: 1953       Price:   $25,000

General Info:  39/44 X 204, 39" Swing over ways, 24" over cross slide, 204" Between Centers, 31/2" Hole through spindle, 18 Spindle speeds from 4.6 - 545 R.P.M., 36" Threads from 2 to 28 per inch, Metric Dipole & Module  threads, Inch dials and lead screw (complete with threading dial) 20 HP on spindle, 40"-4 Jaw chuck, 2-14" Steady rests, Follower rest, Power rapid traverse, Machine manual, 45" Swing in gap to 14" from chuck, Some wear on rear way, Screws appear excellent, Runs excellent, Cleaned & Painted.

Click Below to View Pictures

LeBlond-1

LeBlond-2

Year Built: 1984       Price:   $33,000

General Info:  26" Swing over ways, 144" Between Centers, 31/8" Hole through spindle, L-2 spindle nose, 30 HP on spindle, 12 Spindle speeds from 40 - 1,600 R.P.M (servo shift)., 48 Feeds from 0.0036" to 0.205",  48" Threads from 2 to 112, Metric threading, 2 Chip pans, Coolant, 3 Jaw chuck, 4 Jaw chuck, Faceplate, 7" & 12" roller steady rests, Machine manuals, Runs excellent, Cleaned & painted, Ways excellent

Click Below to View Picture

H.E.S.

Year Built: 1967         Price:   $6,500

General Info:  20 X 60, 20" Swing over ways, 60" Between centers, A-1-6" Spindle nose, 18 spindle speeds from 36 to 1,800 R.P.M., Inch & metric threading built in, Hard ways, 3 Jaw chuck, Full length chip pan, Ways excellent, Rapid traverse, Screws show a little backlash, Runs excellent, Cleaned & painted.

NEW ITEM !

Click Below to View Picture

(Unavailable)

Year Built: 1968        Price:   $12,500

General Info:  18 X 54, 17" Taper, D-L camlock spindle, 2 speed, tailstock with one shot lube, 36 speeds from 14 to 1750 RPM, 10 HP, from government storage.

Click Below to View Picture

Colchester

Year Built: Unknown       Price:   $5,000

General Info:  15 X 50, D-1-8 Spindle nose, 15" Swing, 50" Between center, 2" Hole, Footbrake, SteadyRest, 16 Speeds 25 to 2000 RPM, Inch & metric threading, 10"-3 Jaw with top jaws, Taper attachment, Ways fair with visible wear, Runs good

Click Below to View Picture

Rivett

Year Built: 1950       Price:   $9,500

General Info:  12 X 24, 121/2" Swing over ways, 20" Between centers, 71/4" Swing over cross slide, 11/4" Hole through spindle, 22 - 3600 R.P.M in 3 ranges, 5 HP drive, 72 Feeds from 0.001" to 0.060", 84 Threads form 2 to 240 per inch, Coolant, Hardways, 3500 rpm, Taper Attachment, 3 Jaw, 4 Jaw, Jacobs Collet System, Ways appear excellent, very little backlash in cross feed screw, Runs quiet.

NEW ITEM !

Click Below to View Picture

(Unavailable)

Year Built: 1960       Price:   $3,000      

General Info:  12 X 20, Variable speed to 3,500 RPM, 121/2", 72 Feeds, 72 Threads, ways worn.